We received LS engine parts that had burned oil, corrosion, and grime from our customer. Our solution to making these metal parts look new again is vapor honing (aka vapor blasting).

Mahle Pistons Designed for the Ford 3.0L Duratec V6

GDI has produced better performance and better fuel economy.

We are now offering gearbox services and upgrades for the Noble and Rossion.

Vapor blasting preps the surfaces of metals by removing corrosion and contaminants. The technique was developed as a gentler method for finer finishes.

A custom plenum that is constructed out of good materials (e.g. billet aluminum, carbon fiber, or both) will turn any engine bay into an impressive show piece that will provide benefits on the performance side.

Faulty injectors may cause your vehicle’s engine to misfire and the check engine light to display. Clogged, leaking or dirty injectors have the potential to cause disastrous and expensive engine failure.

The injectors were cleaned and flow tested.

Now that we had the pistons, rods, and crankshaft disassembled, it was time to look at the main upper and rod bearings.

Check your invoices! Did you get charged for race bearings like our customer?

When maintaining an engine used in competition or constant hard-driving, it is good to inspect the inside of the oil filter.